4S 14.76V 4241mAh LiPo Battery Pack, 62.6Wh High-Capacity Drone Battery for FPV Quadcopter & Aerial Photography, Compact 282g Design

4S 14.76V 4241mAh LiPo Battery Pack, 62.6Wh High-Capacity Drone Battery for FPV Quadcopter & Aerial Photography, Compact 282g Design

Features

• High Volumetric Energy Density: Packs 62.6Wh of energy into a compact 57x44x119mm form factor, maximizing runtime without adding bulk.

• Optimized Power-to-Weight Ratio (~222 Wh/kg): The 282g weight offers an outstanding balance, crucial for aerial and mobile applications where every gram counts.

• Stable High-Current Delivery: Designed with low internal resistance to support high continuous discharge rates (C-rating dependent), ensuring minimal voltage sag under load.

• Rugged & Reliable Construction: Features a robust casing or heat-shrink wrap for protection against vibration and minor physical impacts common in RC and drone use.

• Standard Compatibility: The 14.76V/16.8V (charge) system is widely compatible with a vast array of 4S chargers and devices.

Specifications

Applications

• Mid-size Drones & UAVs: Ideal for aerial photography drones, mapping UAVs, and heavy-lift quadcopters that require a balance of flight time and agility.

• FPV Racing & Freestyle Drones: Provides high burst power and stable voltage for aggressive 4S FPV quadcopters.

• Professional Portable Equipment: Powers handheld camera stabilizers (gimbals), high-intensity LED lights, and field monitoring systems.

• High-Performance RC Models: Suitable for 1/10 and 1/8 scale RC cars and boats requiring sustained high power output.

• Custom Power Solutions: Used as an energy module in bespoke portable power banks or electronic projects.

Warnings & Precautions

Charging

• Correct Charger: Use ONLY an intelligent balance charger designed for LiPo batteries.

• Precise Settings: Manually set charger to: LiPo Balance, Cells: 4S, Voltage: 16.8V, Current: ≤4.24A (1C).

• Never Unattended: Always charge under active supervision. Place the battery in a fireproof LiPo safety bag/container on a non-flammable surface.

• Inspect Before Charging: Do not charge if the battery is physically damaged, swollen, or has been involved in a crash.

Discharging

• Voltage Monitoring: Never allow the pack voltage to fall below 12.0V. Utilize your device's low-voltage cutoff or an external battery alarm.

• Temperature & Load Management: Discontinue use if the battery becomes hot to the touch (>60°C). Do not exceed the manufacturer's stated Max. Continuous Discharge Current.

• Short Circuit Prevention: Always keep the output terminals insulated when not in use. Exercise caution during connection/disconnection.

• Damage Protocol: Inspect before and after each use. IMMEDIATELY ISOLATE and dispose of any battery that is swollen, punctured, leaking, or damaged.

Storage

• Storage Preparation: For storage exceeding one week, discharge/charge the battery to Storage Voltage (~14.8V-15.0V) using your charger's dedicated function.

• Safe Transport: During transportation, protect terminals with caps or tape and place each battery in an individual LiPo safety bag.

• Responsible Disposal: Do not dispose of in household waste. Fully discharge and take to a certified battery recycling center.