8000mAh Car Jump Starter, 200A Peak 300A 12V Portable Battery Booster for up to 6.0L Gas Engines, Ultra-Compact Power Bank with USB Charger and LED Light

8000mAh Car Jump Starter, 200A Peak 300A 12V Portable Battery Booster for up to 6.0L Gas Engines, Ultra-Compact Power Bank with USB Charger and LED Light

Features

• Reliable Starting Power: Delivers 200A starting current and 300A peak current, sufficient to jump-start most 12V passenger cars, SUVs, and motorcycles with gasoline engines up to 6.0L or diesel engines up to 4.0L.

• Ultra-Compact & Lightweight: Its slim and portable design (25x139x79mm) makes it one of the most space-saving jump starters available. Easily fits in any glove box, center console, or even a large coat pocket.

• Dual-Purpose Power Bank: The built-in 8000mAh battery reliably charges smartphones, tablets, and other USB devices via the 5V/2.1A USB output port, ensuring you're never stranded with a dead phone.

• Enhanced Safety Protections: Integrated with multiple safety circuits including Reverse Polarity Protection, Over-Current Protection, Short-Circuit Protection, and Over-Charge Protection to ensure safe operation for both the user and the vehicle's electronics.

• Smart Jumper Clamps & Indicator: Features intelligent clamps with spark-free technology and error-alarm indicators. A built-in bright LED work light serves as both a flashlight and an emergency SOS beacon.

• Convenient Recharging: Can be recharged via the included Micro-USB or modern Type-C input port (model dependent), offering flexible charging options from standard USB adapters or car chargers.

Specifications

Applications

• Emergency jump-starting for standard 12V vehicles with dead or weak batteries, including:

  • Cars, Sedans, Hatchbacks

  • SUVs, Small Trucks

  • Motorcycles, Scooters, ATVs

  • Lawn Tractors, Power Sports Equipment

• Serves as a reliable backup battery and portable charger for:

  • Smartphones (iPhone, Android)

  • Tablets, GPS Devices

  • Bluetooth Headphones, Action Cameras

• Provides emergency lighting during nighttime breakdowns, camping, or power outages using its multi-mode LED light.

Warnings & Precautions

• Voltage Check: Verify your vehicle uses a 12V electrical system. DO NOT attempt to use on 6V or 24V vehicles.

• Pre-Use Check: Ensure the jump starter is adequately charged before use. A low unit charge may fail to start your vehicle.

• Correct Connection Sequence (CRITICAL):

  • Power the jump starter OFF.

  • Connect the RED positive (+) clamp to the positive (+) terminal of the car's dead battery.

  • Connect the BLACK negative (-) clamp to a solid, unpainted metal point on the engine block or vehicle chassis (a safe ground), away from the battery and any moving parts.

  • Turn the jump starter ON. Start your vehicle. Limit cranking to 3 seconds per attempt. Wait 30+ seconds between attempts.

  • After a successful start, turn the jump starter OFF immediately.

  • Disconnect clamps in reverse order: Black (-) clamp first, then Red (+) clamp.

• Prohibited Actions:

  • NEVER allow the metal clamps to touch each other when the unit is on.

  • DO NOT use on damaged, corroded, leaking, or frozen batteries.

  • DO NOT connect the black clamp directly to the dead battery's negative (-) terminal if avoidable, to minimize sparking risk.

  • DO NOT disassemble, crush, puncture, or incinerate the unit.

• Care & Storage:

  • Keep dry and away from liquids, extreme heat (above 50°C), or direct prolonged sunlight.

  • Store in a cool, dry place. Recharge at least once every 3 months if storing long-term to maintain battery health.

  • If the device is damaged, deformed, overheats, or emits an odor, discontinue use and isolate it in a safe, open area.