|
상세 정보 |
|||
| 유형: | 니켈수소화금속 충전지 | 크기: | 디 |
|---|---|---|---|
| 용량: | 9000mAh | 전압: | 1.2V |
| 치수: | 34.2x61.5mm | 표준 충전 전류: | 0.1C(900mA) |
| 스토리지 teerature: | -20℃~30℃ | 사이클 수명: | >500 사이클 |
제품 설명
Ultra High Capacity 9000mAh D Cell, 1.2V Rechargeable Ni-MH for Boombox / Emergency Light
Features
- Extremely High Capacity: At 9000mAh, this represents one of the highest capacity levels available for a consumer D-size rechargeable cell, enabling exceptionally long device runtimes.
-
Robust and Safe Chemistry: Ni-MH is inherently stable, resistant to thermal runaway, and contains no toxic cadmium (unlike Ni-Cd), making it an environmentally preferable choice.
-
Excellent High-Current Performance: Capable of delivering high continuous and pulse currents, supporting demanding applications like powerful flashlights or motorized tools.
-
Wide Temperature Operation: Performs reliably in a broad range of environmental conditions.
-
Minimal Memory Effect: Modern Ni-MH cells exhibit very little memory effect, allowing for flexible charging patterns without significant capacity loss.
Specification
| Nominal Voltage | 1.2 V |
| Nominal Capacity | 9000mAh |
| Dimensions | 34.2 x 61.5 mm |
| Standard Charge Current | 0.1C (900 mA) |
| Discharge Cut-off Voltage | 1.0 V |
| Maximum Discharging Current | 3C (27 A) |
| Internal Resistance | ≤ 10 mΩ |
| Operating Temperature |
Charging: 0°C to +45°C Discharging: -20°C to +60°C |
| Storage Teerature | -20℃~35℃ |
| Cycle Life | ≥ 500 cycles |
Applications
-
High-Performance Portable Lighting: Powerful LED lanterns, searchlights, and professional photography flash units.
-
High-Drain Electronic Devices: Large portable speakers/boomboxes, heavy-duty motorized toys, and robotics.
-
Backup & Emergency Power: Emergency lighting systems, backup devices for camping or field use.
-
Professional & DIY Use: Wherever long-lasting, rechargeable D-cell power is required.
Warnings & Precautions
Charging
-
Use a Smart Ni-MH Charger: Always use a charger specifically designed for Ni-MH chemistry that features -ΔV (negative delta voltage) detection and temperature monitoring. This is critical to prevent overcharging.
-
Avoid Continuous Trickle Charging: Do not leave these high-capacity cells on a simple, indefinite trickle charger after they are full, as this can cause damage over time.
-
Charge in a Safe Environment: Charge in a well-ventilated area on a non-flammable surface.
Discharging
-
Avoid Deep Discharge: While more tolerant than some chemistries, consistently discharging below 1.0V per cell will shorten lifespan. Use devices with proper low-voltage warnings or cut-offs.
-
Allow Cooling: After heavy use (high current discharge), let the cell cool to near room temperature before recharging.
-
Use in Matched Sets: When using multiple cells in a device, ensure they are of the same brand, model, age, and charge state to prevent imbalance.
-
Optimal Storage Charge: For long-term storage (>1 month), store cells at a 40-60% state of charge (open-circuit voltage ~1.25V - 1.30V).
-
Physical Care: Do not puncture, crush, deform, or incinerate the cell. Do not remove the outer label.
-
Keep Terminals Clean: Ensure positive and negative terminals are clean and free of debris for good electrical contact.